HP LaserJet Pro 300 color Printer M351 series - Declaration of conformity (wireless models)

background image

Declaration of conformity (wireless models)

Declaration of Conformity

according to ISO/IEC 17050-1 and EN 17050-1

Manufacturer's Name:

Hewlett-Packard Company

DoC#: BOISB-1002-01-rel.1.0

Manufacturer's Address:

11311 Chinden Boulevard

Boise, Idaho 83714-1021, USA

declares, that the product

Product Name:

HP LaserJet Pro 400 color M451nw

HP LaserJet Pro 400 color M451dw

Regulatory Model:

2)

BOISB-1002-01

Product Options:

ALL

Radio Module

3)

SDGOB-0892

Print Cartridges:

CE410A, CE410X, CE411A, CE412A, CE413A

conforms to the following Product Specifications:

SAFETY:

IEC 60950-1:2005 / EN60950-1: 2006 +A11

IEC 60825-1:2007 / EN 60825-1:2007 (Class 1 Laser/LED Product)

IEC 62311:2007 / EN62311:2008

GB4943-2001

EMC:

CISPR22:2005 +A1/ EN55022:2006 +A1 - Class B

1)

EN 61000-3-2:2006

EN 61000-3-3:2008

EN 55024:1998 +A1 +A2

FCC Title 47 CFR, Part 15 Class B

1)

/ ICES-003, Issue 4

GB9254-2008, GB17625.1-2003

Radio

3)

EN 301 489-1 v1.8.1 (2008-04) / EN 301 489-17 v2.1.1 (2009-05)

EN 300 328 v1.7.1 (2006-10)

FCC Title 47 CFR, Part 15 Subpart C (Section 15.247) / IC: RSS-210

ENERGY USE:

Regulation (EC) No. 1275/2008

ENERGY STAR® Qualified Imaging Equipment Typical Electricity Consumption (TEC) Test Procedure

Supplementary Information:

The product herewith complies with the requirements of the EMC Directive 2004/108/EEC and the Low Voltage Directive 2006/95/EC,
the EuP Directive 2005/32/EC, and carries the CE-Marking

accordingly.

206

Appendix D Regulatory information

ENWW

background image

This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

1.

The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.

2.

For regulatory purposes, these products are assigned a Regulatory model number. This number should not be confused with the product
name or the product number(s).

3.

This product uses a radio module device which Regulatory Model number is SDGOB-0892 as needed to meet technical regulatory
requirements for the countries/regions this product will be sold.

Boise, Idaho USA

October 2011

For Regulatory Topics only, contact:

European Contact

Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-
TRE / Standards Europe, Herrenberger Straße 140, D-71034, Böblingen (FAX: +49-7031-14-3143)

www.hp.eu/certificates

USA Contact

Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160, Boise, Idaho
83707-0015 (Phone: 208-396-6000)

ENWW

Declaration of conformity (wireless models)

207